Where the Panels Went
Twelve project profiles across ten countries and nine industries — quantities, products, the problem they solved and the outcome. Representative project types drawn from typical JINGLUE applications.
Pickling Line Walkway Retrofit: 340 m² of Corroded Steel Replaced in Two Shutdowns
A carbon steel pickling plant replaced corroded HCl-area walkways with vinyl ester FRP grating during two weekend shutdowns — zero repaint cycles since.
Read case study →Municipal WWTP: 610 m² of Clarifier Walkways Converted to FRP
A regional water utility replaced rotten concrete-coated steel walkways around four clarifiers with ISO polyester molded grating and FRP handrail.
Read case study →Marina Rebuild: 1,150 m² of Pontoon Decking That Survives Salt and Ice
A full marina rebuild chose gritted FRP grating over wood and aluminum for pontoons that face salt spray year-round and ice scrape every winter.
Read case study →Copper Concentrator: Flotation Platform Decks in Vinyl Ester FRP
A high-altitude copper concentrator specified 50 mm vinyl ester grating for flotation cell perimeters after galvanized decks failed in acid process water within four years.
Read case study →Offshore Platform: Phenolic FRP Escape Routes and Decking
An offshore operator replaced corroded escape-route grating with phenolic FRP — Class 1 flame spread, low smoke, and no corrosion in the marine splash zone.
Read case study →Poultry Processing Plant: Wash-Down Platforms and Stairs That Pass Audit
A poultry plant replaced rusting kill-floor platforms with ISO polyester FRP grating and treads — caustic wash-down proof, free-draining, and audit-clean.
Read case study →Chemical Tank Terminal: Dyke Walkways in Vinyl Ester FRP
A third-party chemical terminal on Jurong Island standardized its tank dyke walkways on vinyl ester FRP after its steel walks failed in mixed-solvent splash service.
Read case study →Desalination Plant: Intake and Outfall Access in Chloride-Immune FRP
A Red Sea SWRO plant specified vinyl ester FRP for intake screening decks, outfall access and trench covers — chloride immunity from commissioning day.
Read case study →Transmission Utility: 1,400 Non-Conductive Cable Trench Covers
A transmission utility replaced steel cable trench covers across four substations with non-conductive FRP panels sized for snow removal equipment loads.
Read case study →Coastal Boardwalk: 830 m² Heel-Safe FRP Decking in a Nature Reserve
A dune nature-reserve boardwalk was rebuilt in mini-mesh FRP grating — heel-safe for visitors, corrosion-free in salt air, and delivered with an FSC-style low-maintenance argument for the council.
Read case study →Nickel Processing Plant: Acid-Area Decks and Access in Vinyl Ester FRP
A HPAL nickel processing plant installed over 1 000 m² of vinyl ester FRP grating in its acid leach and wash areas, where carbon steel access had a two-year life.
Read case study →Highway Bridge: Dead-Load-Limited Walkway Solved with FRP
A federal highway bridge required a new inspection walkway without adding significant dead load — 38 mm molded FRP met the structural limit and the de-icing salt corrosion case.
Read case study →